Water reducing and retarding super plasticizer: Fibcon 412/n is a high range water-reducing admixture formulated specifically to extend the working time of following concrete. It is based on naphthalene formaldehyde.
Application:
- Ready mix concrete
- Parking decks
- Bridge decks
- Industrial floors
- Improves durability of dusting concrete surfaces
Features:
- Produces ‘Flowing’ concrete with controlled delay of slumps loss and workability
- Reduces cracking and permeability of hardened concrete
- Reduces segregation and bleeding in the plastic concrete
- When used to produce ‘Flowing’ concrete
- Significantly reduces concrete placement time and cost
- Generally reduces water requirements
High-Performance Super Plasticizer:
Fibcon 412/PC is a super plasticiser specifically designed for the production of soft plastic concrete with high early strength characteristics .The special formulation of fibcon412/n optimizes the dispersion of the binder and at the same time improves the concrete consistency and cohesion.
Application:
- Precast concrete • Concrete with high water reduction
- High strength concrete
- In situ concrete requiring fast stripping time
- Self compacting concrete
Features:
- Improved workability without increased water content
- Allows easier compaction leading to denser concrete and superior finish
- Reduced shrinkage
- Improved water tightness
- Chloride free does not attack reinforcement.
Melamine based high range water reducing super plasticizer:
FIBCON M-200 is a high range water reducing admixture based on sulphonated melamine formaldehyde condensate product. It may be added to the concrete at the job site or at the ready mix concrete plant. No chlorides are used in its formulation, consequently, it is recommended for pre-stressed concrete.
Application:
- High performance concrete
- Highly slump, flow able concrete
- General ready mix concrete
- Minimum water content concrete
- Heavily reinforced concrete
- Low water or Cement ratio concrete
- Flatwork and mass concrete
- Pumping concrete
- All types of wet shotcrete application
Features:
- Produces low water cement ratio
- Aids in concrete placement and reduces labour cost
- Substantial improvement in workability without increased water or the risk of segregation
- Remarkable increase in both early and ultimate strengths
- Long term slump retention
- No excessive air entrainment
- Improved durability, density and impermeability with better surface finish
- Early de-shuttering
- Produces dense concrete and hence improves waterproofing characteristics.
Liquid & Powder Waterproofing Plasticizing Admixture:
Fibrex No.1 when used as an admixture forms an internal barrier against water penetration. It also increases the plasticity of mortar, reduces water absorption and thereby guards against freeze-thaw damage. It is available in powdered form without chlorides or in a liquid formula, which contains additives for additional densification and acceleration of the mortar or concrete.
Application:
Fibintegral waterpeller is used in mass concrete, foundations, water retaining structures, tanks, basements, reservoirs, terrace slabs, in mortar for masonry work, etc
Features:
- Reduces moisture absorption as much as 60%
- Reduces vapor transmission through walls and slabs
- Improves workability of concrete and mortar
- Ease in application – Makes mortar/concrete more homogeneous – less rebound during plaster
- Easy to finish the mortar and concrete surface
- Reduces water cement ratio – requires less water hence increases the durability of mortar/concrete
- Makes the surface waterproof by blocking the continuous pore channels
Contact:
Fibrex Construction Chemicals Pvt. Ltd.
Plot No. 73, First Floor,
New Dlf Industrial Area,
Faridabad – 121003, Haryana
Cookie Consent
We use cookies to personalize your experience. By continuing to visit this website you agree to our Terms & Conditions, Privacy Policy and Cookie Policy.
