Sharp Pumps, Coimbatore
 
Self Priming Pumps: These pumps are suitable for handling clean water not containing abrasive particles and fluids, which are not chemically aggressive to the pump components. They are extremely reliable, light, economic and simple to use, finding many use in domestic applications, in particular the automatic distribution of water from surge tanks, watering gardens and for boosting insufficient main water pressure. 
 
Centrifugal pumps (Single Stage): Centrifugal pumps have a rotary motion of a profiled impeller in combination with a shaped pump housing to apply centrifugal force to discharge fluids from the pump. They operate most efficiently in high-volume, low-output-pressure conditions, and unlike positive-displacement pumps, the flow may be controlled allowing flow to be completely closed off while the pump is running.
 
Centrifugal Pumps are the most common and well-established pumps on the market. They come in many different models and can transfer fluids with high efficiency over a wide range of flows and pressures. 
 
Dewatering Pumps – PF Series: Submersible De watering pumps are designed for pumping waste contaminated water, which may contain abrasive particles. The pumped liquid may contain particles up to a size, which corresponds to the openings in the strainer. These pumps are used for de watering of basements, cable trenches and low lying areas in residential and small commercial complexes.  The motor is fitted with dual ball bearing running in oil bath and is protected with dual mechanical seal. The pump comes with an automatic switch controller, which turns the motor off, if the water level is low.  The motor is fitted with a protector, which automatically turns off the power when the motor is overheated. This guarantees the security and reliability of pump’s operation even in the atrocious environment.
 
LF Tech Pumps: Open well pumps are ideally suitable for where there are wide fluctuations in water level. This works under water and it rests at bottom of the well. Hence, suction and priming problems do not arise. Pump volute chamber is designed to give the best possible hydraulic efficiency. Dynamically balanced impellers offers vibration free operation with long life.
 
Multistage: Jet pumps are capable of handling all forms of motive fluid including gas, steam, or liquid. They are typically inserted vertically into the process media, but can be mounted horizontally as well. Multiple inlets are used to draw in a constant stream of fluid, using pressure to create lift through suction. The combination of intake pressure and velocity of the liquid or gas jets the media up from a well, tank, or pit through the pump to the discharge point.
 
A Jet Pump is a type of impeller-diffuser pump that is used to draw water from wells into residences. It can be used for both shallow (25 feet or less) and deep wells (up to about 200 feet.)
 
Contact:
 
Sharp Pumps Private Limited
Sharp Nagar, Kalappatti,
Coimbatore – 641 035,
Tel: +91-422-2627330 / 2627331.
Fax: +91-422-2627634.
Email: sharp@md2.vsnl.net.in