Super Plasticizer: A new dimension in admixtures

By Edit Team | February 20, 2017 10:28 am SHARE

Water reducing and retarding super plasticizer: Fibcon 412/n is a high range water-reducing admixture formulated specifically to extend the working time of following concrete. It is based on naphthalene formaldehyde.

Application:

Ready mix concrete
Parking decks
Bridge decks
Industrial floors
Improves durability of dusting concrete surfaces

Features:

Produces ‘Flowing’ concrete with controlled delay of slumps loss and workability
Reduces cracking and permeability of hardened concrete
Reduces segregation and bleeding in the plastic concrete
When used to produce ‘Flowing’ concrete
Significantly reduces concrete placement time and cost
Generally reduces water requirements

High-Performance Super Plasticizer:
Fibcon 412/PC is a super plasticiser specifically designed for the production of soft plastic concrete with high early strength characteristics .The special formulation of fibcon412/n optimizes the dispersion of the binder and at the same time improves the concrete consistency and cohesion.

Application:

Precast concrete • Concrete with high water reduction
High strength concrete
In situ concrete requiring fast stripping time
Self compacting concrete

Features:

Improved workability without increased water content
Allows easier compaction leading to denser concrete and superior finish
Reduced shrinkage
Improved water tightness
Chloride free does not attack reinforcement.

Melamine based high range water reducing super plasticizer:
FIBCON M-200 is a high range water reducing admixture based on sulphonated melamine formaldehyde condensate product. It may be added to the concrete at the job site or at the ready mix concrete plant. No chlorides are used in its formulation, consequently, it is recommended for pre-stressed concrete.

Application:

High performance concrete
Highly slump, flow able concrete
General ready mix concrete
Minimum water content concrete
Heavily reinforced concrete
Low water or Cement ratio concrete
Flatwork and mass concrete
Pumping concrete
All types of wet shotcrete application

Features:

Produces low water cement ratio
Aids in concrete placement and reduces labour cost
Substantial improvement in workability without increased water or the risk of segregation
Remarkable increase in both early and ultimate strengths
Long term slump retention
No excessive air entrainment
Improved durability, density and impermeability with better surface finish
Early de-shuttering
Produces dense concrete and hence improves waterproofing characteristics.

Liquid & Powder Waterproofing Plasticizing Admixture:
Fibrex No.1 when used as an admixture forms an internal barrier against water penetration. It also increases the plasticity of mortar, reduces water absorption and thereby guards against freeze-thaw damage. It is available in powdered form without chlorides or in a liquid formula, which contains additives for additional densification and acceleration of the mortar or concrete.

Application:

Fibintegral waterpeller is used in mass concrete, foundations, water retaining structures, tanks, basements, reservoirs, terrace slabs, in mortar for masonry work, etc

Features:

Reduces moisture absorption as much as 60%
Reduces vapor transmission through walls and slabs
Improves workability of concrete and mortar
Ease in application – Makes mortar/concrete more homogeneous – less rebound during plaster
Easy to finish the mortar and concrete surface
Reduces water cement ratio – requires less water hence increases the durability of mortar/concrete
Makes the surface waterproof by blocking the continuous pore channels

Contact:
Fibrex Construction Chemicals Pvt. Ltd.
Plot No. 73, First Floor,
New Dlf Industrial Area,
Faridabad – 121003, Haryana

Cookie Consent

We use cookies to personalize your experience. By continuing to visit this website you agree to our Terms & Conditions, Privacy Policy and Cookie Policy.