Innovative Coating Industries is the manufacturing wing of promtech group and offer a complete range of stainless steel pickling and passivation chemicals, under the brand name Britoss. The range contains from cleaning to final passivation process chemicals. According to the company the Britoss range chemicals are absolutely user friendly, very easy to handle and can be washed off completely in case of spillage. The Britoss range products, formulated as per the requirements of ASTM A 380 and IS 10117, have very controlled fuming, prove to be even economical compared to use of concentrated nitric or hydrofluoric acids.Pickling: Removal of scales, welding burn marks, oxide formation and heat treatment scales by use of chemical gels and chemical pastes is known as pickling. Cold passivation: Removal of these embedded particles of Iron form the stainless steel fabricated equipment is carried out by the process of cold passivation.  This process differs from the process of acid pickling.Pickling and passivation process products:Effleunt treatment: Effluent treatment of the Britoss range of products shall be carried out by pH adjustments; using neutralier 30 Britoss range products are completely free of chlorides or sulphate. There are no toxic or poisonous ingredients in the formulation of Britoss range of products. Safety requirements for the operators: Britoss ranges of products are acidic and are strong oxidants and hence following precautions may observe strictly by the users of these products.•    Eye protection: Wear chemical type splash goggles when working with these chemicals. Do not allow these products or their vapours to come in direct contact with eyes. Flush with plenty of water in case of spillage or contact of these products with eyes or any part of the body.•    Skin protection: Operators using Britoss range of products shall wear all the necessary protective gear, as used while handling acids and hazardous chemicals. Use rubber or PVC aprons, hand-gloves, face shields, gum boots or safety shoes.                                              •    Respiratory protection: Operators must use nose–filters or face shields for respiratory protection.•    Steps taken for spillage or leakage:  Since Britoss range of products are strongly acidic, flush the floor area where these products are leaked or spilled, with plenty of water. These products are completely soluble and miscible in water and hence are washed away by use of water. •    Storage: All supplies of Britoss range products shall be stored in a cool, dry, covered below and always below 450C. The shelf life of these products is six months from the date of supply. Contact: Pradeep Vaidya, CEO,Innovative Coating IndustriesB-7 / 701, Vedant Complex,Near Vartak Nagar Naka,Thane – 400606, MaharashtraTel.: 22-25883265Mobile: 9820181738Email: puvpromtech@gmail.comwww.promtechaerosol.com