Perma R-Poxy: better grouting solution for tile joints

Perma R-Poxy is a two component thixotropic epoxy resin based coloured joint mortar used for filling joints in between tiles or stone. It is aesthetic germ proof, chemical and hard wearing joints, resistant to a wide range of spillages and chemical attacks. Part A consists of a thick coloured paste consisting of epoxy resin, graded aggregates, pigments and additives. Part B consists of a soft paste consisting of a mixture of graded fillers and catalyst. Perma R-Poxy is primarily used for grouting residential and industrial floor joints where hygiene control, damp and wet conditions are experienced along with chemical resistant properties. The product is available in 1-5 kg pack size.

Applications
Perma R-Poxy is designed for use in floor tile, wall tile and stone joints for interiors as a jointing material and exterior application for joints width varying between 2-15 mm. The application area consists of floor and wall tiles in bathroom and shower areas, kitchen counter tops, terrace and balconies, chemical plants, hospitals refineries, garages, laboratories, warehouses, bakeries and swimming pools.

How to use
Make sure that the tiles or the stone joint operation is taken up at least 72 hrs after the tiles are laid. The joints shall be dry and free from deleterious materials. Apply masking tape where porosity in tiles or stones is encountered. If not, clean the joints with a blower and apply the grout gel using a squeezy blade. Clean the grouted area with a squeezy sponge dipped in water and finishes the surface. Allow the grout to dry through air curing.

Advantages
• High compressive, flexural and tensile strength in excess of
concrete.
• Chemical resistant and waterproof.
• Hygienic and non dusting.
• Easy to use and easy to clean.
• Uniform colouring.
• Stain free.
• Supplied in pre-measured units.
• Does not support bacterial growth.

For more details, visit:
www.permaindia.com