Our objective is to allow our customer to save time and money, by using our high-quality, ergonomic tool and machines.

Lalit Puri, Director,

Nexug Industries Pvt Ltd

Nexug Industries Pvt Ltd provides quick and quality assured solution for the fabrication of the sheet metal roofing, cladding and ducting, whether it is cutting with zero wastage of colour coated or any precious metal sheets, bending manually at site with simple but high-quality hand tools, profiling and seam closing with speed up to approximately 19 feet in a minute with an impressive finish. These specialty machines and tools are designed for the roofing, HVAC and sheet metal industries. Nexug specialises in high quality, traditional and innovative hand tools and machines for craftsmen working on roofing and sheet metal ducts.

Director of the company Lalit Puri strongly believes in delivering customers with the best solutions at affordable price and dedicated after-sales service are the keys to success in any industry. He said, “Our objective is to allow our customer to save time and money, by using our high quality, ergonomic tool and machines. Customers’ suggestions and ideas are highly esteemed and often realised in new products. Meeting and surpassing expectations of every customer is one of our basic principles.”

About Duct Seaming

In houses and buildings with forced-air heating and cooling systems, ducts are used to distribute conditioned air throughout the house and buildings. In a typical house, however, about 20 to 30 per cent of the air that moves through the duct system is lost due to improper seaming, leaks, holes, and poorly connected ducts.

Your air ducts are one of the most important systems in your home and building, and if the ducts are poorly sealed or insulated they are likely contributing to higher energy bills. Your home’s duct system is a branching network of tubes in the walls, floors, and ceilings; it carries the air from central air conditioner to each room.

Ducts that leak heated air into unheated spaces can add huge amount in a year to your heating and cooling bills, but you can reduce that loss by proper machine sealing and insulating your ducts.

Benefits of Duct Seaming

A duct system that is well-designed, machine seamed and proper insulated can make your place more comfortable, energy efficient, and safer.

Proper machine seamed ducts can help to improve indoor air quality by reducing the risk of pollutants entering ducts and circulating through your home.

Leaky ductwork in your heating and cooling system may cause “backdrafting,” where harmful or odour gases are drawn back into the living space, rather than expelled to the outdoors. Sealing leaks can minimise this risk.

Leaky ducts can reduce heating and cooling system efficiency by as much as 20 per cent. Seaming and insulating ducts increases efficiency, lowers energy bills, and can often pay for itself in energy savings.

Energy used in our homes often comes from the burning of fossil fuels at power plants, which contributes to smog, acid rain, and climate change. Simply put, the less energy we use in our homes, the less air pollution we generate. By seaming your ducts and reducing the amount of energy.

Nexug Industries brings following machines and tools for duct seaming and cutting. The company represents world-class brands WUKO-Austria and DRACO-Germany for duct making machines and tools.

WUKO Heavy-Duty Power Tools for Seaming

Handy, low weight, long life
Ideal in the workshop and at site!

Z-Form Seam Closers 1003A – Round Ducts

Function: Closing of Z-form seams, on straight and round work pieces, for a seam height of 5 – 12 mm/0.20 – 0.47-inch, with High working speed: 4 – 6 m/13 – 19 ft/min.  Also used for round pieces (minimum radius approx. 80 mm / 3-inch) and to be used in the workshop and at site.

Z-Form Seam Closers 1003 – Round Ducts

Function: Closing of Z-form seams, on both straight and round work pieces, for a seam height of 6 – 14 mm/0.24 – 0.55-inch with high working speed: 4 – 6 m/13 – 19 ft/min.  Also for round pieces (minimum radius approx. 150 mm/6-inch) and to be used in the workshop and at site.

Pittsburgh Seam Closer 1004 – Square Ducts

Function: Closing of 5/16-inch or 3/8-inch or 1/2-inch Pittsburgh seams, low weight: 3.85 kg/8.5 lbs with high working speed: 4 – 6 m/13 – 19 ft/min.  It easy closing of inner (minimum radius approx. 150 mm/6-inch) and outer radius on elbows.  It can be used in the workshop and at site.

Duct cutting machines

Draco, Germany Shears model 3514-2 / 3514-7R and Nibblers are ideal for cut-outs from round and square ducts. Working speed of the machine up to maximum 5 m/min and can cut U-, C- and L- profiles with ease.

Ideal for cutting: spiral-/round ducting: through 6 times folded double lock and Pittsburgh Seams: mesh and wire: cage construction: sheet metal, stainless steel and non-ferrous materials (aluminium, copper, zinc)

Pneumatic Pittsburgh Lock Hammers

Easily knocks down straight run duct and radius fittings at the rate of 20 feet per minute on 16 to 30 gauge!

Contact
Nexug Industries Pvt Ltd
43, Krishna Market, Kalkaji,
New Delhi – 110019
Mobile: +91-9013570023
Tele: +91-11-49324715
Email: info@nexug.com, sales@nexug.com
www.nexug.com