Dreitop FH (Floor Hard) offered by MC-Bauchemie is a ready-to-use, non-metallic, floor and surface hardener based on very hard natural aggregates. This is to be applied by dry shake method in two operations: on freshly floated concrete or a compensatory mortar topping.

Dreitop FH provides wear resistance to concrete surfaces thereby extending the service life of industrial, commercial and residential floors. The floors are rendered tough, wear resistant, dust free, physiologically harmless and above all durable and maintenance free. With a Mohs scale of hardness approaching a value of 8, Dreitop FH provides the best abrasion resistant protection to concrete floor. It is suitable for a variety of industrial floors, warehouses, hangars or anywhere, durable, abrasion resistant flooring is required. With the usage experience of many thousand square metres, Dreitop FH is the material of choice for heavy-duty industrial flooring needs.

Dreitop FH is a unique combination of selected cementitious binder modified by polymers (to impart the mix plasticity and high strength) blended with well-graded, cubical, natural hard aggregates. The grading is most critical and ensures maximum possible surface density. When applied Dreitop FH provides a denser surface with lower permeability coupled with increased wear and impact resistance. It bonds monolithically to the base concrete and is suitable for old or new floorings and surfaces.

The greatest advantage of Dreitop FH over conventional metallic hardeners is the non-rusting property, which enables its use in wet rooms as well as for outdoor applications. Dreitop FH floors are able to withstand almost all types of mechanical stresses such as rolling, sliding, percussion, impact, abrasion etc. and are very economical when compared to alternatives like epoxies and other liquid plastics.

Advantages
• Highly wear and abrasion resistant toppings which are non-dusting, non-slip and antiskid even in cases of oil spillages
• Suitable for interior and exterior applications, is waterproof and is physiologically harmless
• High density and requires minimum maintenance and is suitable for old floors, new floors and repairs
• Imparts increased strength, impact resistance and twice the abrasion resistance as compared to normal concrete floor.

MC-Bauchemie’s dry-shake floor hardeners (Dreitop FH, Dreitop FH Standard and Suntop FH) are suitable for application on both old floors and new floors. The application methodologies vary in both the cases and are shown in the diagrams.

Contact
MC-Bauchemie (I) Pvt. Ltd.
411, Arenja Corner, Sector 17,
Vashi, Navi Mumbai – 400703Tele: +91-22-27880803 / 27892856;
Fax: +91-22-27893870
Email: info.india@mc-bauchemie.com; mcbindia@yahoo.co.in
www.mc-bauchemie.com