Spectec Building Systems- Pre-Engineering excellence 
 
Spectec is the manufacturer of metal building systems in India, and the product range includes metal roofing and wall cladding systems.
 
Spectec profiles are available in both ribbed and flat panels to give a variety of finishes for attractive roofing and cladding for domestic, commercial and industrial application.
 
The Pre-Engineered metal buildings consists of all components required to construct the primary & secondary framing (including the wind bents, wall/ roof purlins) plus the wall & the roof sheets profile with or without insulation (optional internal liners in metal sheets are available). All necessary bolts, screws, sealants & the trim pieces for field assembly of the building are furnished & no welding is required at site.
 
Primary Steel
All Primary Steel members shall be solid web built up section manufactured out
of 250/345 Mpa grade steel plates
conforming to relevant IS standard.
 
Cold formed section
These shall be Z/C shaped Cold Formed Section out of 250/345 Mpa steel stripes minimum 1.75-2.3mm thick, conforming to IS 513/801.
 
All  necessary  bolts , screws , sealants 
&  the  trim  pieces  for  field  assembly  of  the building  are  furnished  &  no  welding  is  required  at  site. 
 
The PEB system is of four standard types:

Clear Span Building
Multi Span Building
Space Saver Building
Lean to Building  
Loads, Design & Fabrication
All the steel components of buildings are designed & fabricated as per American standards, and IS: 875.
 
Products:

Spectec Hi-Rib and Klippon are

developed to provide permanent

solution for roof and side walls of

industrial as well as commercial building. 
Materials
Spectec profiles are available in the following materials:
 

55%  Al-Zn  coated  sheet  with  anti – fingerprint  coating (e.g galvalume®, zincalume®, aluzinc®, galume etc.). AZ-150Gms, 550 MPa, with colour coating of SMP/XRW.
Pre-Painted  Galvanized  Steel  with  polyester  coating. 120Gsm, 240 MPa. 
Spectec profiles:
A) Spectec Hi-Rib Profile: Spectec Hi- Rib Profile is developed to provide scientific solution for roof & side walls
of industrial as well as commercial buildings. Spectec Hi- Rib is provided with a precisely engineered wide Rib & Flute design to ensure wide spanning & quick recovery after being subjected to
excessive loads.
 
B) Spectec Klippon Profile: Spectec Kippon is stiffened trapezoidal profile with wide spanning and excellent water shedding capability. It is suitable for roofing application on very long roofs down to 2° pitch. Its bold profile and board flat outline makes a strong and striking appearance.
 
Contact: 
 
Spectec Building Systems
Mktg Off – 435, G.F,
Mathura Road, Jangpura,
Bhogal, New Delhi – 14
Tel: +91-11-24377713, 24378813, 24376613
Mr.Krishan Kumar: 09810083607
Email: contact@spectec.co.in
Web: www.spectec.co.in