Since 2021, Kleemann’s new screen for coarse elements has been processing many materials in Neumünster. Flexibility is required, as sand and fine-grained material are found in the gravel quarry, while the screening of rubble and railway ballast is required in recycling applications. The plant is even used to process topsoil, which is often highly cohesive.

An all-rounder for a wide range of applications
The MOBISCREEN MSS 802i EVO can handle stone material ranging from very fine to very coarse, with all degrees of contamination, and is therefore capable of meeting all challenges. For example, in gravel extraction, “Here, we have to deal with a lot of sand and a relatively small proportion of stone. This means that the side discharge conveyor for fine grain has a tough job. Other screening plants would soon reach their limits. This is no problem for our new machine!” says André Krebs, Proprietor of Ernst Krebs GmbH & Co. KG, about the MSS 802i EVO. It is also advantageous that their screen casing can be adjusted over 20 percent steeper than comparable plants. This guarantees an excellent cutting effect for separating fine materials such as sand and significantly higher output.

Flexibility from loading to screen change
The large feed hopper also contributes to flexibility. The rear hopper wall and filling aids can be folded variably, allowing loading from different heights, from both sides and the rear. The screen media change is comparatively easy, even in the lower deck, because the screen casing can be placed horizontally. The screening parameters can be adjusted precisely, and conversion, for example, from three to two final grain sizes, is uncomplicated. Transport from one work site to another is also fast: the discharge conveyors can be folded in without disassembling parts. Thanks to the stepless driving control, the plant can also be moved precisely into position.

Focus on employee safety
The display can be operated intuitively and guarantees safety. With the MSS 802i EVO from Kleemann, all relevant functions can be operated from a safe distance. The display can also be plugged in at different points on the machine. The user is always near the process currently being executed. The complex operation of levers arranged remotely from the component to be folded is a thing of the past. Operation during set-up and service is also simplified.

Users benefit from practical solutions. “It’s obvious here that Development once again looked exactly at what makes work more effective in practice. Everything is so much quicker, set-up times are shorter, and output is higher. This pays off at the end of the day,” adds André Krebs.

Further information is available from: WIRTGEN INDIA Pvt. Ltd. Gat No 301 & 302, Bhandgaon Khor Road, Village Bhandgaon, Taluka – Daund, Dist. Pune, 412214, Maharashtra, India
Phone: +91 20 67682600
E-Mail: sales.india@wirtgen-group.com
Internet: http://www.wirtgen-group.com/india