Thakkar Group is one of the largest independent Engineering group involved in manufacturing of cold roll formed sections, employing state of the art techniques to meet customers demand for quality accuracy and reliability. Thakkar Group has also taken the bold step in Roll Forming Technology By Manufacturing Sections From 0.3 to 8.00 mm It has also entered in a big way In Access Flooring, metal Frames For External Wall And Prefabricated Buildings.  
 
Products
·         Z Purlins
Z Purlins are unique cold roll formed section used to fix roof and side claddings. The advantage of using Z purlins is unlimited depth and thickness option which gives the designer the required freedom to design most economical purlin.
 
The higher Zxx value gives more stability in lateral direction and thus minimizes saving.Designer can select different thickness Z purlins with similar depth for the same structure, which ensures overall economy for the structure. Sleeved Purlin system ensures continuity and rigidity to the structure.With the use of properly designed Z purlins, one can save up to 40% of steel to be used in construction as compared to conventional system of using Hot rolled purlin or Hot rolled angles or tubes.With additional attachment we can do concealed wiring for services which improves aesthetic value of the structure. If proper planning is done, provision can be made for hanging tight fitting from Z purlins.
 
·         Pre-Fabricated Building Systems
Pre-Fab metal building system consists of a series of integrated, carefully designed, factory-fabricated components. The typical system is composed of primary and secondary framing, roof, wall and accessory subsystems, designed to give the building customer versatility, protection, performance predictability and life cycle value.
 
·         Roof Decking SheetsWe offer a outstanding range of steel decking profiles made out of galvanized steel (of all range), Plain cold rolled (CR) steel or even hot rolled (HR) steel for wide variety of roofing applications.We offer a variety of metal thickness (0.50 mm to 2.00 mm) profile and finish to meet differing requirements regarding span, insulation, water proofing, imposed load, and any other considerations.
 
Contact:Thakkar Group of Companies601, Sidhartha Arcade, Above Hsbc Bank ,
L. T. Road, Borivali WestMumbai-400 092, Maharashtra (India)Tel: +91-22-28992174Fax: +91-22-28993048E-mail : mktg@metcraftindia.com
Web: www.metcraftindia.com