Vrushabh is one of the leading manufacturer and distributor of Conveyor Belts, Transmission Belts, Elevator Belts, PVC Belts in the country having a substantial market share since 1990, With one of the largest and biggest range of Conveyor Belts in the region. Vrushabh has a Belt for almost every material handling application from light to heavy duty.
 
The aim of the company is to fullfill & match customer’s requirements by manufacturing and marketing suitable conveyor belts to their specific requirements with unmatched and fabulous after sales-service support. Thanks in part to our distributor partners.
 
Our mission has always been to produce quality products, maintain strict, prompt & scheduled delivery and create manpower wealth.
 
Further our activities were never limited to manufacturing and selling of conveyor belt to customers but also to provide them with immediate services for any kind of operational wear and tear and breakage of conveyor belts. We have setup our sister concern “VRUSHABH RUBBERS” which takes care of customer’s sites and Conveyor Belts.
 
Sister Concern Company :
VRUSHABH RUBBERS
At “VRUSHABH RUBBERS” we have qualified engineers and technicians with vast experience in the field of Hot Vulcanising and Cold Vulcanising of Conveyor Belts at own works as well as customer’s sites irrespective of distance and region. We also undertake annual job Contracts for Conveyor Belt Joining, Pulley Lagging, Rubber lining in tanks etc. Our specialist service engineers and technicians with vast experience are always available on your call.
 
Standard Belt Width (mm) :
300, 400, 450, 600, 650, 750, 800, 900, 1000, 1200, 1400, 1500, 1600, 1800 and 2000.
The belt in width not listed can be manufactured as per the customer’s requirement.
Belt Edges :
Belt edges can be given in both cut edge and sealed edges.
Carcass
A. Synthetic Carcass : The carcass consists of Nylon-nylon (NN) and Polyester Nylon (EP) constructions and are available with ratings starting from 200/2-315/3 upto 2000/6. For further information on complete range and grades, refer to the technical belt selection chart.
 
B. Cotton-Cotton Carcass : The Cotton Carcass belts offered are available in 28, 32, 34, 36, 42 & 48 Oz from 2 to 10-ply construction.
 
C. Cotton / Nylon Carcass : The range of cotton / nylon Carcass belts are available as per customer’s spacification.
 
Advantages of NN / EP Conveyor Belts

Excellent Flexibillity
Very low permanent elongation
Excellent Cover – to – ply adhesion
Maximum Load Support
Suitable for Mechanical fasteners
Impect Resistance
Suitable for all types of Cover Grades.
 
Technical Selection Chart for Belt Style And Cover Grades
1. Grade SAR :
Specially compounded rubber cover grade recommended for maximum resistance against abrasion, tear, cuts & strong impacts. This cover grade is recommended for heavy-duty applications for abrasive materials such as large lump ores, sharp rocks, granite, iron and copper.
 
2. Grade M 24 :
Specially compounded rubber cover recommended for superior resistance to cutting & gouging. Conforms to maximum abrasion loss value specified for grade M in DIN 22102. Belts made with this cover grade conform to IS 1891 Pt. I.
3. Grade N 17 :
Specially compounded rubber cover grade recommended for handling moderately abrasive material. Conforms to the maximum abrasion loss value specified for Grade N in DIN 22102. Belt made with this cover grade conform to IS 1891  Pt. I.
4. Grade HR :
Specially compounded rubber cover grade recommended for handling materials like alumina, ash, chemicals etc. having material temperature over 65 °C and upto 125 °C for coarse and 110 °C for fine materials. The Belts made with this cover grade conform to IS 1891 Pt. II for HR-Type T-1 grade.
 
5. Grade SHR :
Specially compounded rubber cover grade to provide adequate heat resistance for handling material temperatures over 65 °C for coarse & 125 °C for fine materials. The belts made with this cover grade conform to IS 1891 Pt II for HR Type T-2 Grade.
 
6. Grade UHR 200 :
Specially compounded rubber cover grade provides excellent heat resistance & moderate abrasion wear resistance characteristic & is recommended for material temperature upto 200 °C for fine materials.
 
7. Grade CMR :
Specially compounded rubber cover grade recommended for handling chemically active material with or without oil coating, like ANP, Suphla, Potash etc.
 
8. Grade OR :
Specially compounded rubber cover grade with blended synthetic rubber compounds recommended for giving resistance to mineral, vegetable & animal oils. V-Con Belts made with this cover grade conform to IS 1891 Pt. III.
9. Grade FR :
Specially compounded rubber cover grade to meet the growing demand for fire resistant conveyor belting conforms to Canadian Bureau of Mines specifications CAN / CSA / M-422 / M-87
IS : 1891 Pt. V  
ISO : 340
 
Ordinary Belt: 15 seconds after removing from the flame of burner.        
Fire resistant Belt: 15 seconds after removing from the flame of burner.
10. Grade hygienic:
Specially compounded rubber cover grade recommended for use in Tea Gardens, Food Processing Industries etc. This cover grade conforms to IS Pt. IV.
 
Contact:
 
Vrushabh Beltings Pvt Ltd
333, Abhishek Complex,
Akshar Chowk, Old Padra Road,
Vadodara – 20
Tel: +91-265-2352283/2352284
Fax: +91-265-2352287
Email: v-con@vrushabhtranscon.com
Web: www.vrushabhtranscon.com