Flexible Geared Couplings
Product Description
Crane Control Make Flexible Geared Couplings are suitable for over coming the following type of misalignments.1. PARALLEL OFFSET-Where axis of connected shafts are parallel but Not within the same straight line.2. ANGULAR-Axes of shafts intersect at the centre of coupling3. COMBINED ANGULAR-Offset axes of shafts are neither parallel nor do they intersect.The Hubs of Crane Control Make Couplings are machined from EN-9 Steel forgings to close tolerances for accurate alignments and proper balance.The outer casing in also machined from EN-9 Steel Forging.The Flanged sleeves are bolted by hexagonal headed machined bolts. Sleeves of a particular size of coupling are inter changeable for easy replacement.
Our Products
Electro Hydraulic Thrustor Brakes
Resistance Boxes
Master Controllers
Lever Limit Switch
Gravity Limit Switch
Rotary Geared Limit Switch
Brake Drum Coupling
Shrouded Bus Bar Conductor
Flexible Geared Couplings
Multiple Wire Cable Trolley
Single Wire Cable Trolley
Heavy Duty Bearing Wheel Cable Trolley
Aluminum Casting Lever Limit Switch
Flat Type Current Collector
Thrustor
Drum Controller
Radio Remote Control
Electromagnetic Brakes
Stainless Steel Punched Grit
Rubber Buffers
Profile
We are a leading manufacturer and stockist of Control Gear Equipment, used in EOT Cranes , Crane Unloaders as well as Grabbing Cranes which include the following.
STARTING RESISTORS
AUTOMATIC ROTOR STARTER PANEL
DYNAMIC BRAKING RESISTORS
S.S.WIRE GRID RESISTANCE BOXES
CURRENT COLLECTORS
ELECTRO HYDRAULIC BRAKES
MASTER CONTROLLER
PUNCHED GRID RESISTANCE BOXES
LEVER LIMIT SWITCH
ELECTRO HYDRAULIC THRUSTORS
ROTARY LIMIT SWITCH
F LEXIBLE GEARED COUPLINGS
CABLE TROLLEYS
ELECTRO MAGNETIC BRAKES
(Please refer Annexure – A for comprehensive list).
We are also manufacturing Starting / Slip Resistors used for starting high capacity Slip ring Motors in industries such as Sugar Mills, Rolling Mills etc.
In fact we have installed an Automatic Rotor Starter Panel along with Starting / Slip Resistance at M/s SBEC Sugar Ltd., Malikpur Baraut , Distt. Bagpat which is an associate company of M/s Modi Sugar Mills for operating Two Motors of 1000 HP each .
This project had been taken on a Turnkey bases where it was our responsibility of Designing , Manufacturing , supplying and commissioning the system which consisted of 2 motors of 750 KW and 2 Motors of 350 KW.
We are also manufacturing Dynamic Braking Resistors for AC Drives.
In addition to above for the last Sixteen years we have been providing excellent service to both Crane manufacturers as well as users and most of the Crane manufacturers are installing our products as original equipment.
Our products are approved in both private as well as Government organisations.
Some of our prominent and regular clients are :
Avon Cranes Pvt. Ltd.
Mar uti Udyog Ltd.
Automech Industries.
Mawana Steel Pvt. Ltd.
Babnan Sugar Ltd.
Northern Railway, Jagadhri
Basti Sugar Ltd.
Northern Railway, Kanpur
Bhilai Steel Plant
Northern Railway,Tuglakabad
Bhushan Steel & Strips Ltd.
Rachitech Engg. Pvt. Ltd.
Chittaranjan Loco Motive Works
Rail Coach Factory, Kapurthala
Diesel Components Works
Somani Iron & Steels Ltd.
Elite Steels Pvt. Ltd.
Sri Durga Bansal Fertilizer Ltd.
H. B. Cranes Pvt. Ltd.
Trimurtee Fertilizers Ltd.
Hero Cycles Ltd.
Unicon Technology Int. Pvt. Ltd.
K. M. Sugar Ltd.
Vardhman Special Steels Ltd.
Mangalam Cement Ltd.
Viduit Engineering & Technology
Our products are designed, based on the respective Indian Standards and hence can be interchanged with other brands provided of course if the other manufacturer has also followed the correct Indian Standards while designing and manufacturing his product.
In our company we have an on going process of R&D for improving the Quality of our products.
Since we are regularly manufacturing the products at times we can even supply you material at short notice there by reducing the down time of your customer’s system during maintenance or brake down.
Supplying equipment at short notice does not mean that the equipment does not under go proper tests.
An in house testing facility and quality control department checks every product as per the relevant standards before it is despatched.
For example every Thrustor Brake is checked on a Torque testing machine for the required torque as well as current drawn on load and without load before it leaves the factory
High Voltage testing and insulation test is performed on every Panel as well as Resistance Box before despatch.
In addition to the complete range of Control Gear Equipment and in keeping with our commitment to provide our customers with the best possible services, we also have sole selling dealership for Imported SHROUDED BUS BAR CONDUCTORS of M/s INSUL – 8 Ltd.,UK., so that at our factory where we have a single out let, we can provide our customer be it a Crane manufacturer or a Crane user this unique service:
“The availability of the complete range of
Control Gear Products. Under one roof”
M/s INSUL – 8 LTD, are one of the leading manufacturers of insulated Down Shop Lead system in the world. In fact BRITISH STEEL UK is using their system for the EOT Crane.
Also there are a number of installations in India it self such as Rail Coach Factory, Kapurthalla, BSES Ltd , Escorts JCB , Railway Workshop, Gomoh etc., where INSUL-8 system is in operation.
Contact:
Crane Control Equipments
A-90, DDA Sheds,
Okhla Industrial Area, Phase-II,
Delhi – 110 020.
Tel: +91-11-692 9653, 682 0919, 631 4501
Fax: +91-11-683 9063
Email: ccedelhi@vsnl.com
Web: www.cranecontrolequipments.com
Cookie Consent
We use cookies to personalize your experience. By continuing to visit this website you agree to our Terms & Conditions, Privacy Policy and Cookie Policy.