Innovative Coatings offers anti corrosion coatings and paints mainly for chief engineers and maintenance managers
 Innovative Coatings has offered its manufactured products for repainting/salvaging and annual maintenance of structural fabrications, mild steel fabrications in chemical, fertilisers, petro-chemical, pharma, cement, steel, paper, insecticides and pesticides manufacturing plants. This will vary substantially enhance the life of the plant/equipment, offer satisfactory protection against atmospheric corrosion and will also be found quite useful in marine, saline chemical / acidic atmospheres. Rust RemovingThe first step shall be removal of existing rust (lose and adherent) from the metal surface. The methods adapted for this is to treat the entire surface to be cleaned with Rustogel 1406. This is a light green, phosphoric acid based de-rusting gel. This is offered in a gel format so that it will stand on the vertical surface and will not run down. It will react, loosen and dislodge the rust from the metal. The minimum reaction time for Rust Removal shall be 10 minutes. Rust is a sub-surface phenomenon.  Hence if the rust is not completely removed, the spread of rust can reappear after six month to an years time. Rustogel 1406 is offered in 5Kg and 30Kg HDPE Carbuoys. Rustofix 1411This is rust converter, rust preventive and a premium anti-rust primer. An off-white, emulsion type of liquid, used by brushing or spraying as supplied. Rustofix 1411 will leave a brownish – blackish polymerised air dried film. The rust converter film shall be allowed to hard dry, for 8 hrs or over-night, before any next Coat is applied. One application is quite sufficient. Rustofix 1411 is offered in 5 and 30 Ltrs packing.
Zinkote-20 Premium and GP (99 per cent pure zinc rich paint coating)Zinkote 20 is a quick air drying zinc flakes rich paint. This is applied by brush / spray or dip application. Single application will offer 25 microns coating. Over-coating is not necessary, however in such a case, the first coat shall be allowed to hard dry for 8 hrs. Over-Coating period is 24 hrs. On a cleaned and de-rusted mild steel or a galvanised surface. It is expected to offer more than 800 hrs of salt spray fog chamber test anti – corrosion life. It seals off any entry of moisture, water vapours, chemical fumes etc, and stops Rusting due to Air-Oxidation under most severe test conditions. Zinkote 20 Premium is suitable coating for anti – corrosion in moist, saline, marine and chemical vapours / fume containing environments. ZINKOTE 20 Premium is offered in 4 Ltr tin and 20 Ltr drums.
Zinc Bright SprayThis is 99 per cent pure zinc flakes metal spray in 500 ml self spray aerosol spray.  It is a modern metal spray paint dispensing method. This is used where spray equipment cannot be made available, and where speed of work, uniformity of coating and aesthetics are the important criteria. It is user friendly, and can be used for coating of metal at heights / in remote areas, where power is not available for spray process.