Innovative Coating Industries offers Rustogel, a gel rust remover and Zinkote-20, zinc flakes rich paints coatings for mild steel engineering fabrications/structures. Both the products are developed using latest technology and offer outstanding corrosion-resistance life for coated structures. The combination coating have passed 1,000 hours of fog chamber salt spray test and can resist every type of corrosion, including marine and salty atmospheres to chemical fumes and high-humidity conditions.
Surface preparationsThe preparation for rusted and non-rusted steel (C sections, I beams and pipes/angles used for all heavy engineering fabrication) is done by complete removal of oil and grease and a light wire brushing to remove the existing loose rust (oxides of iron).
Rustogel 1406Rustogel 1406 is used for complete removal of loose and adherent rust, mild scales, oxides of iron from the metal surface, fabrications, large MS equipment, trusses, chimneys, ms frameworks, angles, channels, pipelines, steam lines, off-shore constructions, lighting poles, signal towers and antennas, ship building and ship repairs, and all pre-engineered buildings need removal of rust prior to painting or during annual re-painting and maintenance work.
Apply Rustogel 1406 with brush or plastic spray. Allow 10-15 minutes for rust/iron oxides to be loosened from the surface. After this, either swab with a cloth soaked in water or wash the treated area with a jet of water. All loose, adherent rust will be removed. Repeat if heavy rust persists on the steel surface.
Zinkote 20The rust converted steel shall be overcoated with Zinkote 20 (a zinc rich paint used for cold galvanising) Zinkote 20 is manufactured by using pure acrylic resin and 99 per cent pure zinc metal flakes. These zinc flakes have horizontal packing in the dry film. Zinc metal being extremely passive completely stops any further corrosion or attack of atmospheric oxygen, saline water, humidity in air or chemical vapours and fumes on the coated steel sections and fabrication. Single coat will offer 18-20 microns of zinc, and double coat, if necessary, may be done after 24 hours. Zinkote 20 is an instant air-drying paint; hence, unused tins shall be always tightly closed to avoid losses due to evaporation. The coating shall confirm to most of the requirements of national and international standards. Zinc Bright in 500 ml self-spray aerosol format also offers silver bright finish cold galvanising on damaged/scratched galvanised surfaces.
Innovative Coating Industries offers outstanding weld cleaners and weld brighteners. These are also termed as pickling and passivation of SS 304 and 316L. These are most effective in weld cleaning and recommended for chemical process plants and equipment, SILOS, solar and power generation equipment, heat exchangers, all types of SS 304 and 316 l fabrications, chemical and pharma plants, hospital and kitchen ware, electric and electrical domestic appliances etc. It also offers weld cleaners and weld brighteners for 202 grade stainless steel and alloy steel castings.
BRITOSS range products conform with the requirements of ASTMA 380 and IS 10117. These are most economically priced and quite at par with the best brands available in the market.